Tytan™ TNBT serves multiple purposes, including its utilization as a moisture scavenger to extend the shelf life of moisture-sensitive, high-viscosity products. It is exclusively suitable as an additive for solvent-based products and facilitates ambient temperature curing while enhancing corrosion resistance.

Chemical Family: Titanates

Reaction Type: Esterification, Olefin Polymerisation, Transesterification

Labeling Claims: Non-Toxic, SVHC Chemicals-free

Applicable Processes: Alpha Olefin Manufacturing, Condensation Polymerization, Fatty Acid Esterification, Methacrylic Esters Manufacturing, Plasticizers Manufacturing, Polybutylene Terephthalate (PBT) Manufacturing, Polycarbonate Resins Manufacturing, Polyester Polyol Manufacturing, Polyethylene Terephthalate (PET) Manufacturing, Polyolefin Manufacturing, Resin Modification, Ziegler Alcohol Manufacturing

Synonyms: Titanium Butoxide

Ask EM Sullivan Questions

GS

VD

Message our experts with questions

GS

Gene Sullivan

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

VD

Vince D'Andrea

Executive/Management

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims
CASE Ingredients Features
Industrial Additives Features
Product Benefits
  • High performance catalyst
  • Non-toxic Catalyst
  • High Ti-content and eactivity
  • Ambient emperature curing
  • Improved corrosion resistance
  • High efficiency
  • Low freezing point

Applications & Uses

Markets
Applications
Applicable Processes
Compatible Polymers & Resins
Compatible Substrates & Surfaces
Cure Method
Adhesive & Sealant End Applications
Coating End Applications
Product Applications
  • Tytan™ TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture.
  • Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization.
  • Tytan™ TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
  • Tytan™ TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan™ TNBT can only be used as an additive to solvent based products.
Suitability
  • RTV sealants
  • Resin modifier
  • Silicone or 2K coatings
  • Glass coatings
  • Air dry coatings
  • Raw material for organo zirconate cross-linker
  • Sol-gel coatings
  • Polyolefin, Ziegler alohol
  • Polycondensation

Properties

Color
Physical Form
Appearance
Clear pale yellow liquid
Physical Properties
ValueUnitsTest Method / Conditions
Viscosity (at 25°C)70.0mPa.s-
Flash Pointmin. 40°C-
Initial Boiling Point312.0°C-
Pour Pointmax. -50°C-
Melting Pointmax. -30°C-
Density (at 25°C)0.990g/ml
Specifications
ValueUnitsTest Method / Conditions
Color*max. 2GardnerHQP-806-2**
Titanium Content13.7 ~ 14.3%HQP-801-1**
As Titanium Dioxide Content22.8 - 23.8%-
Specific Gravity (d₄²⁵)0.980 - 1.000-HQP-803-1**
Chlorides0 - 50ppmHQP-802-1**

Regulatory & Compliance

Technical Details & Test Data

Preparation of Bis(2-ethylhexyl)phthalate various catalysts at 200°C


Raising the reaction temperature to 220°C increases the effectiveness of the titanates more than that of the acid catalysts. Figure 2 shows that the "cross-over point" for TYTAN TIPT and methane sulphonic and p-toluene sulphonic acids is at 40-65% conversion compared with 83-93% at 200°C.

Preparation of Diisononyl phthalate comprising acids at 150°C and TYTAN TNBT at 200°C


All catalyst at 1.0 molar % concentration based on phthalic anlydride

Packaging & Availability

Packaging Type
Packaging Information
Packing Size
25 Liter (Kg) 200 Liter (Kg)

IBC 1000 Liter (Kg)

25 200 1000