Unisil SE 50-94M

• Reduces capillary water absorption of treated surfaces;
• impregnation with an emulsion prevents reduction of heat insulation properties of the material, long resistant to effect of different factors, including alternate freezing-thawing, as well as resistant to ultraviolet and infrared rays, alternate wetting and drying;
• penetrates deeply into the pores without clogging them, maintaining vapor permeability of the material processed;
• does not change the appearance of material treated;
• non-toxic.

• Water repellent treatment of gypsum boards and blocks
• for water repellent treatment of surfaces that absorb moisture, such as brick, concrete, natural building and ceramic products.

At volumetric treatment

• Unisil SE 50-94M is added into mixing water to gypsum. To achieve sufficiently reduced water absorption, use about (0,2 – 0,8) % of the emulsion from the amount of dry gypsum, or (0,1 – 0,2) % from the cement.
• The efficiency of emulsion Unisil SE 50-94M depends on the qualitative and quantitative composition of material, so no precise advice on dosage can be given. Always provide preliminary test to determine the optimal amount of emulsion Unisil SE 50-94M.

At surface treatment Unisil SE 50-94M is diluted with water immediately before use.

• Standard dilution: for 1 L of Unisil SE 50-94M add 9 L of water. Diluted solutions can be applied by dipping, spraying or brush. Apply working solution on a dry, clean surface until absorbed, preventing drops. Consumption depends on the porosity of the surface of the processed material.
• Always test selected concentration of liquid on a small material sample to be sure in its suitability.

Special polymer containers up to1 m³.

• Store in closed original containers of the manufacturer at temperature from 0 °C to 30 °C. Store in a cool, dry, well-ventilated place. Protect from direct sunlight and freezing.
• Store away from oxidizers, strong acids, alkalis and other chemicals having alkaline reaction for example, ammonia, amines).
• The shelf life in original container is 12 months.
• Storage over the date specified on the label does not necessarily mean the product is unusable. In case if store more please check the properties of product before use.